Off-Axis Parabolic Mirrors
An off-axis parabolic mirror is a specialized optical mirror cut from a larger parabolic mirror. Parabolic mirrors collimate light, and an off-axis parabolic (OAP) mirror will do the same, and can also focus incident collimated light to a point. At Avantier Inc, we excel in delivering custom off-axis parabolic mirror design and manufacturing solutions for a wide range of applications
OAP mirrors are smaller than parabolic mirrors and are easier to incorporate into complex optical systems with minimal obstruction. Their small footprint and unique shape causes the mirror’s focal point to be readily accessible.
By definition, it is cut from the parent parabola at an off-axis: it is not centered on the parent’s optical axis. Because of this, the optical axis of the derivative mirror will be displaced from the optical axis of the parabolic mirror. The focal point, however, will be the same.
As shown on the diagram below, this is an example of focusing collimated light to a single point after light beam is reflected on the surface of the off-axis parabolic mirror.
In order to increase the reflectance on the reflective surface, Avantier usually will coat additional gold or silver layer, thus making sure customer’s application could achieve a higher efficiency
There are three important specifications when we try to describe an off-axis parabolic mirror, which are off-set angle, parent focal length, and effective focal length:
Off-set angle: The angle between the optical axis and the direction of the incoming or outgoing light beam in an off-axis parabolic mirror.
Parent focal length: The focal length of the ideal on-axis parabolic mirror with the same shape as the off-axis mirror.
Effective focal length: The actual focal length of the off-axis parabolic mirror, accounting for the offset angle and deviation from the ideal configuration.
Centered Parabolic Mirror: This diagram shows a traditional parabolic mirror where parallel light rays converge at a single focal point (F). It’s ideal for applications where the light source or target is on the optical axis.
Off-axis Parabolic Mirror (OAP): This diagram depicts an OAP mirror that focuses collimated light to an off-center focal point, allowing unobstructed access to the focal plane. It’s useful when the optical axis must be kept clear for other components or when a wide off-axis angle is needed.
Choosing an Off-Axis Parabolic Mirror
Key parameters of an off-axis parabolic mirror are the off-axis angle (OAA), the off-axis distance (OAD), and the focal length.
Choose an appropriate OAP mirror by deriving the desired reflected focal length from your desired beam diameter. The small angle approximation leads to a very simple relationship between these two parameters:
Beam Diameter = 2 x sin(Θ) x Reflected Focal Length
Where Θ is the divergent half-angle of the incident light. In fiber optics, when collimating from an optical fiber, you may replace sin(Θ) by NA (fiber).
How to Use an OAP Mirror?
It can be used to derive collimated light from a point source or spherical wave by placing the source or origin of the wave at it’s focal point. It can also be used to focus collimated light to a point by directing the light along the optical axis.
Manufacturing Capabilities
Material |
Aluminum |
Diameter |
0.4~600mm |
Diameter tolerance |
+0, -0.2mm |
Focal length tolerance |
+/- 1 % |
Off-axis distance tolerance |
+6, -0mm |
Clear Aperture |
95% |
Surface roughness |
R5nm |
Surface accuracy |
1/10 lambda RMS |
Surface Shape |
1/8λ |
Surface Quality |
60-40 |
EFL |
1.29~16000mm |
* Optics design available upon request
Commonly Used Specifications
Type |
15° Off-Axis |
30° Off-Axis |
45° Off-Axis |
60° Off-Axis |
Diameter |
25.40mm |
50.80mm |
25.40mm |
50.80mm |
Effective Focal Length (EFL) |
387.60mm |
54.45mm |
148.79mm |
135.45mm |
Y Offset |
3.95mm |
27.20mm |
4.14mm |
4.62mm |
*Other specific angles, sizes and custom coatings are available upon request
Actual Specifications of OAP Metal Mirrors from Previous Orders
Focal Length (m) |
Diameter, D |
Thickness, Te (mm) |
Off-Axis distance, OAD (mm) |
Off-Axis angle (degrees) |
0.5 |
2.5in/63.5mm |
15 |
60 |
6.9 |
0.75 |
3in/76.2mm |
15 |
80 |
6.1 |
1 |
2.5in/63.5mm |
5 |
60 |
3.4 |
1 |
4in/101.6mm |
17 |
110 |
6.3 |
1.25 |
3in/76.2mm |
15 |
80 |
3.7 |
1.25 |
5in/127mm |
20 |
100 |
4.6 |
1.5 |
6in/152.4mm |
25 |
100 |
3.8 |
2 |
4in/101.6mm |
17 |
110 |
3.2 |
2 |
5in/127mm |
20 |
100 |
2.9 |
2 |
8in/203.2mm |
33 |
150 |
4.3 |
2.5 |
10in/254mm |
45 |
175 |
4 |
3 |
6in/152.4mm |
25 |
100 |
1.9 |
4 |
8in/203.2mm |
33 |
150 |
2.2 |
5 |
10in/254mm |
42 |
175 |
2 |
OAP Metal Mirrors
Focal Length (m) |
Diameter, D |
Thickness, Te (mm) |
Off-Axis distance, OAD (mm) |
Off-Axis angle (dgrees) |
0.5 |
2.5inch/63.5mm |
15 |
60 |
6.9 |
0.75 |
3inch/76.2mm |
15 |
80 |
6.1 |
1 |
2.5inch/63.5mm |
5 |
60 |
3.4 |
1 |
4inch/101.6mm |
17 |
110 |
6.3 |
1.25 |
3inch/76.2mm |
15 |
80 |
3.7 |
1.25 |
5inch/127mm |
20 |
100 |
4.6 |
1.5 |
6inch/152.4mm |
25 |
100 |
3.8 |
2 |
4inch/101.6mm |
17 |
110 |
3.2 |
2 |
5inch/127mm |
20 |
100 |
2.9 |
2 |
8inch/203.2mm |
33 |
150 |
4.3 |
2.5 |
10inch/254mm |
45 |
175 |
4 |
3 |
6inch/152.4mm |
25 |
100 |
1.9 |
4 |
8inch/203.2mm |
33 |
150 |
2.2 |
5 |
10inch/254mm |
42 |
175 |
2 |
Coating Specifications
Material |
Range(um) |
% Reflection |
Protected Aluminum |
0.4-0.7 |
85 |
Protected Aluminum |
0.4-2.0 |
90 |
Enhanced Aluminum |
0.45-0.65 |
95 |
UV Enhanced Aluminum |
0.25-0.45 |
89 |
UV Enhanced Aluminum |
0.25-0.70 |
85 |
Protected Gold |
0.7-2.0 |
96 |
Protected Gold |
2.0-10.0 |
96 |
Bare Gold |
0.7-0.8 |
94 |
Bare Gold |
0.8-2.0 |
97 |
Bare Gold |
2.0-12.0 |
98 |
Protected Silver |
0.45-2.0 |
98 |
Protected Silver |
2.0-10.0 |
98 |
Ultrafast Enhanced Silver |
0.6-1.0 |
99 |
Custom Off-Axis Parabolic Mirror
At Avantier Inc. we produce custom high-performance Off Axis Parabolic Mirrors for many applications. A wide variety of coating options are available for these mirrors, including protected gold, protected silver and protected aluminum. For visible and infrared use, protected aluminum is usually a good choice. We can provide SM-threaded, unthreaded, or post-mountable adaptors for any axis mirror in stock. If you are looking for stock Off-Axis Parabolic Mirrors, visit Stock – Off-Axis Parabolic Mirrors.
Our OAP mirrors are diamond turned to provide a smooth mirror surface and a low level of surface roughness. Contact us today if you’d like to discuss a custom order for an optical mirror with your desired focal length and characteristics.
WE CAN HELP YOU!
Contact us NOW for sales & expert advice.